Available: 1 unit (quantity not confirmed by the supplier). Supplier stock: held by the supplier in Montreal, not at Godberd; sold to order. Manufacturer specifications (source: ManualsDir (Fargo HDP600 User Guide Rev. 2.3, Technical Specifications pages 25 to 31), third party, read 2026-11-12) The Fargo HDP600 is a High Definition card printer and encoder that prints the image onto a clear film and fuses it to the card, giving over the edge coverage and a tamper evident layer on CR-80 ID cards. It prints at 300 dpi with 16.7 million colours, at roughly 35 to 72 seconds per card depending on ribbon, from a 200 card input hopper into a 100 card output hopper. The HDP600-LC variant adds a card lamination module for clear or holographic PolyGuard overlaminates, which matches the laminator and hologram in the listing. It connects by USB 1.1 or Centronics parallel, with Windows 2000/XP drivers, and can take magnetic stripe, contact, Mifare, HID Prox and iCLASS encoders. The printer alone measures 663 x 356 x 381 mm and weighs 35 lb, or 55 lb with the lamination module. Key figures: 80 W power supply; 15.9 kg; 663 x 356 x 381 mm; connections: USB. HDP (High Definition Printing) dye sublimation / resin thermal transfer, prints to a film that is then fused to the card; 300 dpi, 16.7 million colours. Over the edge printing on CR-80 cards; thickness 30 to 70 mil (0.762 to 1.778 mm), 30 to 40 mil when laminating. Batch speed: 35 s/card YMC, 40 s/card YMCK, 72 s/card YMCKK; 40 s YMCK or 72 s YMCKK with lamination on the HDP600-LC. 200 card input hopper, 100 card output hopper. 8 MB RAM, expandable to 32 MB. Interface USB 1.1 or Centronics parallel IEEE 1284. Options: Card Lamination Module (HDP600-LC), ISO and JIS II magstripe, contact, Mifare, HID Prox and iCLASS encoders, external print server. Weight 35 lb (HDP600), 55 lb (HDP600-LC with lamination module); power supply 80 W, or 160 W for HDP600-LC; 100 to 240 V AC 3.75 A. Note: Fargo's own HDP600 pages are gone; figures come from the HDP600 user guide on a manuals site. Weight 15.9 kg is converted from the stated 35 lb; with laminator the manual says 55 lb (about 25 kg) and dimensions 883 x 356 x 381 mm. Listing mentions laminator and hologram so the unit is likely an HDP600-LC. Parallel port recorded in facts only.