Available: 1 unit (quantity not confirmed by the supplier). Supplier stock: held by the supplier in Montreal, not at Godberd; sold to order. Manufacturer specifications (source: Fargo HDP600 / HDP600-LC user manual, technical specifications (hosted by ManualsDir), third party, read 2026-11-12) The Fargo HDP600 is a high definition retransfer ID card printer and encoder that prints at 300 dpi onto film and fuses it to CR-80 cards from 30 to 70 mil thick, with over-the-edge coverage. A full colour card with one black panel takes about 40 seconds, roughly 94 cards per hour; two black panels or lamination take 72 seconds. It feeds from a 200 card hopper into a 100 card output hopper and connects by USB 1.1 or parallel port. The HDP600-LC adds a card lamination module and is 883 mm wide. The base printer measures 663 x 381 x 356 mm and weighs 35 lb, with an 80 W external supply. Key figures: 80 W power supply; 15.9 kg; 663 x 381 x 356 mm; connections: USB. HDP dye-sublimation / resin thermal transfer retransfer printing, 300 dpi, 16.7 million colours. Batch speed 40 s per card / 94 cph YMCK; 72 s / 54 cph YMCKK; 72 s / 50 cph YMCKK with lamination. CR-80 cards 30 to 70 mil; ABS, PVC, PET, PETG; HID proximity, MIFARE and contact smart cards. 200 card input hopper, 100 card output hopper, SmartScreen LCD. Interface Centronics parallel IEEE-1284 or USB 1.1; 8 MB RAM expandable to 32 MB. HDP600 381 x 663 x 356 mm, 35 lb; HDP600-LC with lamination module 883 mm wide, 55 lb. 80 W supply (two 80 W bricks for the LC), 100-240 VAC 3.75 A. Encoding options: ISO and JIS II magnetic stripe, contact ISO 7816, contactless MIFARE, HID prox, iCLASS. Note: Figures are from the Fargo user manual on ManualsDir (the fargo.com brochure found was for the oversized HDP600 CR100, not this model). Weight converted from 35 lb; LC version 55 lb (24.9 kg). The listing's 'laminator opt' means the HDP600-LC figures may apply.