Available: 1 unit (quantity not confirmed by the supplier). Supplier stock: held by the supplier in Montreal, not at Godberd; sold to order. Manufacturer specifications (source: HID FARGO HDP5000 specifications sheet PLT-00069 (hosted on a reseller CDN), official datasheet, read 2026-11-12) The HID FARGO HDP5000 is a retransfer ID card printer that prints at 300 dpi onto a clear film which is then fused to the card, giving over-the-edge coverage on CR-80 cards from 30 to 50 mil thick. It prints a full colour card in about 24 seconds, up to 150 cards per hour, from a 100 card input cartridge into a 200 card output hopper. It connects by USB 2.0 or Ethernet with a built-in print server. Modules add dual-sided printing, lamination and magnetic stripe, contact or contactless smart card encoding. The dual-sided configuration measures 445 x 292 x 235 mm and weighs 10 kg. Key figures: 10.0 kg; 445 x 292 x 235 mm; connections: USB, RJ45 Ethernet. HDP dye-sublimation / resin thermal transfer retransfer printing, 300 dpi, 16.7 million colours. Up to 24 s per card / 150 cards per hour YMC; 29 s / 124 cph YMCK; 40 s / 90 cph YMCKK. CR-80 cards, 30 to 50 mil, over-the-edge print; ABS, PVC, PET, PETG, proximity, smart and mag stripe cards. 100 card input cartridge, 200 card output hopper, graphical OLED display. USB 2.0 and Ethernet with internal print server. Options: dual-sided module, single or dual-sided lamination, magnetic stripe, contact and contactless (iCLASS, MIFARE) encoding. Base printer 292 x 313 x 235 mm, 7.3 kg; with dual-sided module 445 mm wide, 10 kg. 100-240 VAC 3.3 A, 50/60 Hz; Windows XP through Windows 10 drivers; FIPS 201 approved. Note: Dimensions and weight given are for the HDP5000 with the dual-sided module, matching the listing; base unit is 313 mm wide and 7.3 kg. Release year not stated on the sheet (sheet dated 2020).