Available: 1 unit (quantity not confirmed by the supplier). Supplier stock: held by the supplier in Montreal, not at Godberd; sold to order. Manufacturer specifications (source: ManualsDir (Fargo Pro-L user manual, Section 10 Technical Specifications, pages 86 and 87), third party, read 2026-11-12) The Fargo Pro-L is a desktop dye sublimation and resin thermal transfer ID card printer with a built in lamination station for applying PolyGuard overlaminates to printed cards. It prints at 300 dpi with up to 16.7 million colours, in roughly 8 seconds for a monochrome card or 30 seconds for a full colour YMCKO card, with about 20 seconds more when laminating. It holds up to 100 CR-80 PVC cards and accepts card widths of 53 to 67 mm and thicknesses of 10 to 40 mil. The computer connection is a Centronics parallel port, with drivers for Windows 3.1x, 95/98 and NT. It measures 630 x 278 x 265 mm, weighs 18.6 kg and runs on 100 to 240 V AC. Key figures: 18.6 kg; 630 x 278 x 265 mm. Dye sublimation / resin thermal transfer, 300 dpi (11.8 dots/mm), up to 16.7 million colours. Print speed about 8 s (K) or 30 s (YMCKO) per card, plus about 20 s to apply PolyGuard overlaminate. Built in lamination station for PolyGuard overlaminate. Card width 53 to 67 mm, length 82 to 98 mm single sided, thickness 0.254 to 1.02 mm (10 to 40 mil). Card hopper holds up to 100 standard CR-80 PVC cards. Interface: 8 bit Centronics type parallel (ECP compatible). Supply 100 to 240 V AC, 50/60 Hz. Manual dated August 2000. Note: Figures are from the Pro-L user manual (2000) on a manuals site, not a Fargo page; Fargo's own Pro-L pages are no longer online. Parallel port is not in the allowed interface list so it is recorded in facts only. Release year not stated.