Available: 1 unit (quantity not confirmed by the supplier). Supplier stock: held by the supplier in Montreal, not at Godberd; sold to order. Manufacturer specifications (source: Fortinet FortiAP Series Data Sheet (FAP-DAT-R32-202101, Copyright 2021 Fortinet), PDF hosted by BlueAly/AVFirewalls, official datasheet, read 2026-11-12) The Fortinet FortiAP 321E is an indoor enterprise wireless access point for medium-density environments such as offices, classrooms and retail floors. It carries two 802.11ac Wave 2 radios, one on 2.4 GHz and one on 5 GHz, each 3x3 MIMO with three spatial streams, for up to 450 Mbps and 1,300 Mbps respectively, plus a Bluetooth Low Energy radio for scanning and iBeacon advertising, all on six internal antennas. It connects through a single 10/100/1000 RJ45 port and has an RS-232 serial console on a second RJ45 jack. Power comes over Ethernet by 802.3af or 802.3at PoE, from a GPI-115 or GPI-130 injector, or from the SP-FAP200-PA AC adapter, with a maximum draw of 16.8 W. It is managed by a FortiGate wireless controller or FortiAP Cloud, supports up to 16 SSIDs, and measures 180 x 180 x 38 mm at 0.454 kg. Key figures: 1 RJ45 port; 0.5 kg; 180 x 180 x 38 mm; connections: RJ45 Ethernet, serial console, powered over Ethernet, DC power input, Wi-Fi, Bluetooth. Indoor 802.11ac Wave 2 access point, dual radio 2.4 GHz and 5 GHz plus a BLE radio. 3x3:3 stream MIMO on both radios; up to 450 Mbps on 2.4 GHz and up to 1,300 Mbps on 5 GHz. 6 internal PIFA antennas (3 dBi at 2.4 GHz, 4 dBi at 5 GHz) plus 1 internal BLE antenna. 1x 10/100/1000 Base-T RJ45 port and 1x RS-232 RJ45 serial console port. Powered by IEEE 802.3af or 802.3at PoE, the GPI-115 or GPI-130 injector, or the SP-FAP200-PA AC adapter; maximum power consumption 16.8 W. Up to 16 simultaneous SSIDs (14 with background scanning); up to 128 clients on radio 1 and 512 on radio 2. WPA, WPA2 and WPA3 with 802.1X or preshared key; local bridge, mesh and tunnel SSID modes. Operating temperature -10 to 45 C; ceiling, T-rail and wall mount kits included; limited lifetime warranty. Note: Figures are from the Fortinet FortiAP Series datasheet revision R32 dated January 2021, the last Fortinet edition to carry the E series; the current datasheet on fortinet.com (fetched and read) no longer lists the 321E, so the PDF used is a Fortinet-published document hosted on a reseller CDN. Release year is not stated in the datasheet and is left null. Search snippets from third-party lifecycle trackers put end of sale in June 2021 and end of support in June 2026; those were not verified against Fortinet's own lifecycle page and are not entered in the spec.