Available: 1 unit (quantity not confirmed by the supplier). Supplier stock: held by the supplier in Montreal, not at Godberd; sold to order. Manufacturer specifications (source: Fortinet (FortiSwitch Secure Access D-Series datasheet FS-SA-D-DAT-R11-201602, hosted by BlueAlly), official datasheet, read 2026-11-12) The Fortinet FortiSwitch 424D-FPOE is a 1U rack mounted 24 port gigabit access switch with PoE+ on all 24 ports and a 370 W budget, plus two 10 GE SFP+ uplinks, a management port and a serial console. It has an 88 Gbps switching capacity, a 16K MAC table and 4K VLANs, and is managed through FortiLink from a FortiGate firewall or on its own. It has a built in AC supply with an optional external redundant supply, draws up to 403 W at full PoE load, measures 440 x 310 x 44 mm and weighs 4.83 kg. Key figures: 1 rack unit; about 397 W in use; 370 W PoE budget; 25 RJ45 ports; 2 SFP ports; 4.8 kg; 440 x 310 x 44 mm; connections: RJ45 Ethernet, SFP+, serial console. 1U access switch: 24x GE RJ45 PoE/PoE+ ports (802.3af/at) plus 2x 10 GE SFP+ uplinks (1 GE SFP compatible). PoE budget 370 W. 1 dedicated 10/100/1000 management port, 1 RJ45 serial console. Switching capacity 88 Gbps, latency under 1 us, 16K MAC addresses, 4K VLANs. 1 GB DRAM, 128 MB flash. Built in AC supply; optional FRPS-740 external redundant supply; 397 W average, 403 W max; 100 BTU/h. Limited lifetime warranty; datasheet dated February 2016. Note: Datasheet dated February 2016. Fortinet ended support on 2025-11-19 per the search result; not verified on a Fortinet page. ports_rj45 counts the 24 network ports plus the management port.