Available: 6 units. Supplier stock: held by the supplier in Montreal, not at Godberd; sold to order. Manufacturer specifications (source: Zebra ZXP Series 3 Card Printer data sheet P1032915 (hosted by a reseller), official datasheet, read 2026-11-12) The Zebra ZXP Series 3 is a compact direct-to-card ID printer that prints dye-sublimation images at 300 dpi on CR-80 PVC cards between 10 and 40 mil thick. The dual-sided version prints about 140 colour cards per hour with a black back, 180 single-sided colour cards, or 700 monochrome cards. It feeds from a 100 card covered hopper into a 45 card output tray, connects by USB 2.0 with optional 10/100 Ethernet, and can add magnetic stripe or smart card encoding. It measures 200 x 236 x 368 mm, weighs 5.3 kg and draws up to 100 W. Key figures: 100 W power supply; 5.3 kg; 200 x 236 x 368 mm; connections: USB, RJ45 Ethernet. Dye-sublimation thermal transfer direct-to-card printing, 300 dpi, single or dual sided. 700 cards per hour monochrome single-sided; 180 cph YMCKO single-sided; 140 cph YMCKOK dual-sided. Edge-to-edge printing on CR-80 cards, 10 to 40 mil, PVC and PVC composite. 100 card covered feeder, 45 card output hopper, 16-character LCD. USB 2.0 standard, built-in 10/100 Ethernet optional. Options: magnetic stripe encoder, contact and contactless (MIFARE) smart card encoding, CardSense single feed, lockable enclosure. Standard model 236 mm high, 200 mm wide, 368 mm deep, 5.3 kg. Auto-switching 90-132 / 190-264 VAC, 47-63 Hz, 100 W maximum continuous; ENERGY STAR. Note: Data sheet dated 2013; dimensions are for the standard model and may differ slightly for the dual-sided unit. Zebra's own site returned 406 so the Zebra data sheet was read from a reseller copy.