Available: 1 unit (quantity not confirmed by the supplier). Supplier stock: held by the supplier in Montreal, not at Godberd; sold to order. Manufacturer specifications (source: Eltron card printer brochure, Fall 2001 (hosted on archive.org), official datasheet, read 2026-11-12) The Eltron P310C is a single sided full colour dye sublimation plastic card printer from the Eltron (later Zebra) P-series, used for photo ID cards, employee badges and student IDs. It prints a card in about 25 seconds, edge to edge, driven by a 32 bit processor with 2 MB of image memory and 512 KB of flash. The standard connection is a Centronics parallel port, with RS232C serial and USB as factory options. The input feeder and output hopper each hold 75 cards of 30 mil, and a magnetic stripe encoder or smart card contact station can be fitted. Key figures: connections: serial console, USB. Single sided full colour dye sublimation card printer. 25 seconds per card. Resolution not stated on the brochure page read. Centronics parallel interface standard; RS232C serial and USB interfaces optional. 32 bit processor, 2 MB image memory, 512 KB flash. Card capacity (30 mil): 75 card input feeder, 75 card output hopper. Options: magnetic stripe encoder, smart card encoding contact station. Edge to edge printing on PVC and composite PVC cards. Note: Listing says P310Cm, probably P310C with the magnetic encoder option. Brochure (Fall 2001) gives no dimensions, weight, resolution or power; the P310 user manual on barcodesinc returned 403. Parallel port recorded in facts only.